Tungsten Alloy Plate Supplier

Corfforaeth Aloi Eagle (EAC) is the leading global supplier of High Density Machinable Tungsten Alloy plate and can supply custom plate sizes and custom grades or alloys with short lead times.

Eagle Alloys Corporation can supply various grades of High Density Machinable Tungsten Alloy plate from 0.188” Thk up to 8” Thk. For thinner material EAC can supply sheet as thin as 0.002” Thk. If you do not see your plate size listed below, cysylltwch â'n tîm gwerthu cwrtais i'ch cynorthwyo. Please view or print our High Density Machinable Tungsten Alloy stock list for our complete stock sizes and capabilities.

High Density Machinable Tungsten Alloy plate is typically supplied to meet the requirements of ASTM-B-777 Class 1, 2, 3, a 4, MIL-T-21014, AMS-T-21014, AMS 7725 Type 1 and Type 2. High Density Machinable Tungsten Alloys typical applications include weights, ballast, balancing rotating systems for aerospace and race cars, bariau diflas, sinker bars, crank shafts, cysgodi ymbelydredd, medical imaging, high precision tools, darts, lead replacement, collimator, and oil & gas drilling applications.

High Density Tungsten Alloys are made produced by a process called powdered metallurgy. This is a technique where tungsten powder is mixed with nickel, copr (anfagnetig) or iron (magnetig) powder or some other binder elements. It is then compacted, and liquid phase sintered. The result is a very high density machinable material having a homogeneous structure with no grain direction. This provides a material with unique applications and physical properties. Parts made from this material are intended for uses such as weights or counter-balances in static or dynamic balancing, high-speed rotating inertia members, cysgodi ymbelydredd, hypervelocity impact, and vibration-damping applications. In selecting the appropriate alloy for a given application, it is important to note that as the tungsten content of the alloy is increased, stiffness, radiation attenuation, and density increase with an accompanying decrease in attainable ductility. These alloys may contain elements that make them magnetic. Customers should specify if they require a non-magnetic alloy. According to the ASTM specification, non-magnetic material is defined as material having a maximum magnetic permeability of 1.05.